G2 Axle & Gear CORE Dual Rate Sway Bar System - 72-2050DR — Vicious Offroad Skip to content

G2 Axle & Gear CORE Dual Rate Sway Bar System - 72-2050DR

SKU G2-72-2050DRS
Sold out
Original price $1,299.99 - Original price $1,299.99
Original price $1,299.99
$1,299.99
$1,299.99 - $1,299.99
Current price $1,299.99

07-Current Wrangler JK, 2 & 4 Door
Reduces body roll and provides stable highway driving capabilities
Allows full suspension travel while off-roading without removing sway bar linkage
Multiple end link positions for adjustability
The DRS System is designed to work with existing on board air compressor systems, and can be disengaged and re-engaged on the fly
The DRS Body is fully sealed for maintenance free use and is built from 6061 aluminum for superior corrosion resistance
Included: G2 DRS POD Switch, wiring harness, solenoid, and mounting hardware




The G2 Core DRS is a state-of-the-art off-road sway bar system for your Jeep Wrangler JK. Crawling on the ground to disconnect your sway bar links, forgetting to disconnect entirely or running without a sway bar can be a thing of the past. The DRS features two heat-treated chromoly shafts that work in unison via a hardened 4140 steel locking assembly. When engaged, the first and second stage torsion bars work together to provide rigid on-road stability that gives up to 20% more articulation than the stock sway bar. A switch inside the cabin of the Jeep controls a pneumatically actuated mechanism that disengages the primary 1-1/2-inch diameter first stage torsion bar, freeing up the suspension to move substantially more. The second stage 5/8-inch torsion bar remains engages and has a lighter spring rate to give minimal anti-roll leverage. The system is designed to work with existing on-board air compressor systems, can be disengaged and reengaged on the fly, and defaults to the engaged position as a safety precaution. The G2 Core DRS body is fully sealed for maintenance free use and is built from 6061 aluminum for superior corrosion resistance. The arms are built from 4140 chromoly steel and feature multiple attachment points to further fine tune the handling of your vehicle. The system can also accommodate manual sway bar disconnect links to completely disconnect the sway bar from the front differential.

Fitment

Year Make Model
1987 Jeep Wrangler
1988 Jeep Wrangler
1989 Jeep Wrangler
1990 Jeep Wrangler
1991 Jeep Wrangler
1992 Jeep Wrangler
1993 Jeep Wrangler
1994 Jeep Wrangler
1995 Jeep Wrangler