Home - Return to Previous Page
No Image Available

Pro Comp Stage III 4-Link 4 Inch Suspension Kit with 2.5 Coil Overs - K4212BPX

Pro Comp K4212BPX Lift Kits K4212BPX Pro Comp EXPK4212BPX

K4212BPX

Bolt-on 4-link control arm brackets Heavy duty tubular upper control arms Custom-stamped steel construction lower arms 4-link bracket crossmember adds strength and transfer case protection Pro Runner 2.5 Coil Overs FMVSS 126-approved California Residents: WARNING Pro Comp Suspension | Part Number: EXPK4212BPX Shocks Series:Pro Runner Shocks Included:Shocks Included Suspension Type:4-Link Rear Lift Method:Lift Blocks & U-Bolts Front Shocks:Pro Runner 2.5 Coil Overs Lift kit:4 Inches stage 3 Fitment:Direct Fit Rear Shocks:Pro Runner 2.5 REsi Rear Lift Component:Block and u-bolt Lift Height Range:3 to 4.99 Inches

Pro Comp’s wicked new 4-link suspension kits provide up to 4 inches of lift while providing optimum control and stability for the 2017-19 Ford Super Duty. These new kits maintain the ideal roll center while increasing wheel travel for improved off-road performance. Specially-engineered brackets position the extended-length control arms in the perfect 4-link geometry to deliver compliant ride quality and minimal caster and pinion angle change. Heavy duty, tubular upper control arms can be adjusted on-vehicle for easy caster adjustments. An added crossmember between the 4-link brackets provides rock protection for your transfer case and custom-stamped steel lower arms are engineered to clear 37-inch tires at full steer. For maximum performance and control the Pro Runner 2.5 coilover is the ultimate choice. These hand assembled adjustable monotube coilovers will raise the front suspension 3-4 inches. They feature an over sized 2.5 inch zinc plated body for increased oil capacity allowing cooler operation. The upper and lower mounts are heavy-duty Teflon steel alloy spherical bearings to eliminate deflection. The vehicle specific ride tuning was derived after extensive dyno and real-world testing. The result is multi-stage valving that optimizes ride quality and handling characteristics for your specific application. The brushed, Zinc plated, clear coated, monotube shock body is nitrogen gas charged to eliminate performance-robbing cavitation during compression and rebound, allowing the shock to dissapate heat more efficiently, drastically reducing shock fade. The external reservior allow for additonal fluid capacity and maximum heat dissapation.
Availability: Out of Stock

Shipping Information

  • Item Requires Shipping
  • 355.0 lbs.
  • W24.0000” x H23.0000” x L48.0000”
  • Free Shipping!